With the addition of a sunroom, there is probably no better place in your home to relax and look out over the surrounding landscape. To appreciate the outdoor scenery all year round, you will need to keep your solarium windows away from mud, stains and clouds.

When is the best time to clean your sunroom windows? We recommend choosing an overcast day in early spring. Avoid sunny days, which can dry the glass too quickly and leave streaks.

Let’s cover the tools and procedures to bring clarity back to your cupboard windows, both inside and outside.

Gather your materials

The best way to clean windows in a tanning bed starts with the right tools: A soft, lint-free cloth, warm water, glass cleaner or gentle dishwasher, spray bottle, scraper (with a rubber blade about 10 inches long or longer).

Apply warm water and soap

To start washing solarium glasses, fill an empty spray bottle with a few glasses of water and a tablespoon or two soft soaps. Spray the mixture generously onto the inner windows. From the outside, you can use a hose to displace some material, but avoid setting up a jet or sink with electricity that could push water through the seals.

Scrub window

The heat of the sun can bake dirt and other stains on your vinyl frame. Use your rag to remove them and reapply soap and water as needed. Contact the company by clicking here.

Clean with Glass Cleaning Solution

You may need a glass cleaning agent if you have stains or marks that are difficult to remove and cannot be removed during cleaning. Before spraying, check and follow the instructions for using the product to see how to clean the glass in your sunbed as effectively as possible. You can let the solution work on the stains for a few minutes but rinse it thoroughly with water before it dries.

Scrubber to remove excess water

Use the scraper as a snowplough by pulling it horizontally from one side of the panel to the other. Work from top to bottom and overlap the scraper strokes about an inch, allowing excess water to flow down only from one end of the tool. We do it for top sunrooms in Myrtle Beach. Dry the scraper blade after each pass with a cloth and repeat this step until you reach the bottom.

Dry the windows

A squeeze action will push the water to the edges of the panel. Wipe vertically on the inside of the frame with a rag to collect any stains or droplets that may have lingering.

Open windows and doors

Increased airflow helps to reduce humidity and condensation, which limits the likelihood of strips forming as windows dry out. Stand back and admire your work!